IMPORTER & DISTRIBUTOR
Used for both primary and secondary cultivation, the tiller inverts soil and garden trash whilst leaving a fine, even finish. In very hard soils tilling will be in first gear and may need you to make several passes so as to chip away at the hard crust by digging deeper on each pass.
The over use of a tiller can be detrimental to your soil by making the top soil too fine, however when you create and maintain a properly structured soil profile, most of your tilling can be carried out in second or third gear which is generally not detrimental to your soil. Tiller rotor speed is 290 rpm and depth and tilth control are standard features. Working depth is up to 200mm in good soil structure.
Suitable for all root crops (onions, garlic). Simple design with low power requirements. The entry shear passes under the crop, the soil and crop pass onto the sifting rods, the soil drops through the rods leaving the crop to be deposited on the surface.
There are 2 models—the Single which throws soil to the right and Swivel which by operation of a handle can throw soil to either the left or right.
Primary or Secondary cultivator with a vertical rotor fitted with four plough-type shears that cut into and laterally discharge the soil or standing crop(oats/corn, etc). Ideal for opening up new ground,perfect for hilling up beds. The working action causes no panning effect and is gentle on the soil. An adjustable wheel controls the depth down as far as 300mm. Great for one pass trenching (draining).
MT500V has 500kg carrying capacity. This heavy-duty trailer includes a padded seat along with duty brake and parking brake. An easy-to-use dump feature also allows owners to get rid of their haul smoothly and effectively.
115cm cut with oil bath transmission.
Ideal for standing crop to be gathered or matted pasture grass, bracken, etc.
Great on slopes—aids tractor stability.
Five Tyne Cultivator. Great for loosening up new or crusted ground. Fully adjustable for width (for inter-row work) and depth (with gauge wheel).
Standard is a conventional plough that turns the soil to the right whilst the reversible has two boards, one that turns to the right and one to the left with a simple switch-over handle.
Sturdy unit which is ideal for turning the first sod in preparation for working new ground. Also works well as a skimmer, cutting just below the surface to dislodge unwanted vegetation.
Fully adjustable in entry angle, plough shear angle and cutting position behind the tractor (plough can be in the centre of the tractor or our level with one wheel).
80cm Heavy Duty Mower (slasher type). Ideal for heavy cutting conditions,but also great for fine cutting (lawn). Has front castor wheels.
Designed for seed bed preparation with clod burying leveling bar, vertical “stirring” blades and full width mesh depth adjusting roller. The blade action is gentle on the soil and there is no downwards pressure to create any panning. The soil is not inverted-it keeps it’s layer structure.
Adjustable Ridger – Easily attaches to the rear of the walking tractor in order to create a furrow (ie:shaping beds).
This tool has shank-mounted disk hillers on each side, clamped to a 45″ wide frame. The disk hillers are more effective than furrowers or ridgers for “throwing” up the soil to make a raised bed, as they are turning by ground contact as they are pulled through the soil; a drag chain levels off the top of the bed.
Heavy duty 65cm and 85 cm Flail Mowers with adjustable roller height control. Extremely robust with heavy “agricultural” reversible Y blades. Will mulch high standing crop (corn), overgrown pasture, manure, in one pass or simply mow grass like a lawn mower.
60cm reciprocating spader that works, as the name suggests, like a set of six shovels. Ideal cultivating implement for farmers who work hard to create a perfect soil structure-and want to maintain it.
The spader has no vices, it’s gentle on the soil, leaves no hard pan, works in wet conditions and will bury tall standing crop residue without tangling or blocking.